Solid Carbide Replacement Insert Knife-Rectangle
- Code: 5026
- Material:Carbide
- Coating:No coating
- Length：30mm、40mm、50mm、60mm
- Width：12mm
- Thickness：1.5mm
- Angle：35°
Main features
- New grades now available for different material types such as softwood/ hardwood MDF/solid surface and micro-finish for general.
- When replacing or rotating inserts, the seat should be as clean as possible.
- This will prevent breakage of inserts and ensure proper insert alignment.
- To properly align the insert, press the insert away from the seat while tightening to approximately 55 inch pounds torque.
- This allows the countersink in the tip and the taper of the head on the flathead screw to slide the tip into its proper position.
Application
general Purpose wood, chipboard, plywood
| TCT二刃复合刀带横槽 | 1103 | ||||
| TCT Two Flutes Compression Bit With Teeth 1103 |
|||||
| 序号 | 编号 | 关键尺寸 | 柄径 | 刃径 | 刃长 |
| NO | Order No. | Size | SHK | CED | CEL |
| 1 | 11030620 | 6*20 | 1/2 | 6 | 20 |
| 2 | 11030622 | 6*22 | 1/2 | 6 | 22 |
| 3 | 11030625 | 6*25 | 1/2 | 6 | 25 |
| 4 | 11030628 | 6*28 | 1/2 | 6 | 28 |
| 5 | 11030630 | 6*30 | 1/2 | 6 | 30 |
| 6 | 11030820 | 8*20 | 1/2 | 8 | 20 |
| 7 | 11030822 | 8*22 | 1/2 | 8 | 22 |
| 8 | 11030825 | 8*25 | 1/2 | 8 | 25 |
| 9 | 11030828 | 8*28 | 1/2 | 8 | 28 |
| 10 | 11030830 | 8*30 | 1/2 | 8 | 30 |
| 11 | 11031022 | 10*22 | 1/2 | 10 | 22 |
| 12 | 11031028 | 10*28 | 1/2 | 10 | 28 |
| 13 | 11031032 | 10*32 | 1/2 | 10 | 32 |
Speed And Feeds
Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can’t find the information you’re looking for, Weix Tool has a team of technical experts available to assist you.
Contact Us: [email protected]
Recommended Products
TCT Three Flutes Spiral Bit
Two Flutes Tapered Ball Nose End Mill
Solid Carbide Corn End Mill
