Roland blades
- Material：Tungsten steel
- Coating：No coating
- SHK：2mm
- CED：1mm
- Angle：30°/45°/60°
- OVL：23mm
- Application：30° is suitable for engraving: thin materials or relatively small characters and patterns
45° suitable for engraving: PVC/cut film paper/sticky notes (most versatile)
60° is suitable for engraving: thicker materials (such as reflective film materials)
Main features
- The sharp tip improves cutting efficiency and smoothes the material incision.
- Made of tungsten steel, it is one-piece with high hardness, durability, toughness, break resistance and good wear resistance.
Application
- Knife tip adjustment：If different types of cutters are used, or paper of different materials is used, the length of the cutting blade tip should also be adjusted accordingly. After adjusting the blade tip, test the cutting effect.
|
Bur ID. |
Blade diameter 刃径 |
Shank Diameter |
Total Length |
Angle |
|
1 |
1 |
2 |
23 |
30 |
|
2 |
1 |
2 |
23 |
45 |
|
3 |
1 |
2 |
23 |
60 |
Speed And Feeds
Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can’t find the information you’re looking for, Weix Tool has a team of technical experts available to assist you.
Contact Us: [email protected]
Recommended Products
TCT Three Flutes Spiral Bit
Two Flutes Tapered Ball Nose End Mill
Solid Carbide Corn End Mill
