Solid Carbide Replacement Insert Knife-Square
- Code: 5025
- Material:Carbide
- Coating:No coating
- Length：14mm、15mm
- Width：14mm、15mm
- Thickness：2mm、2.5mm
- Angle：30°、35°
- Shape: Square
Main features
- When replacing or rotating inserts, the seat should be as clean as possible.
- This will prevent breakage of inserts and ensure proper insert alignment.
- To properly align the insert, press the insert away from the seat while tightening to approximately 55 inch pounds torque.
- This allows the countersink in the tip and the taper of the head on the flathead screw to slide the tip into its proper position.
Application
woodturning, woodworking.
| TCT二刃复合刀带横槽 | 1103 | ||||
| TCT Two Flutes Compression Bit With Teeth 1103 |
|||||
| 序号 | 编号 | 关键尺寸 | 柄径 | 刃径 | 刃长 |
| NO | Order No. | Size | SHK | CED | CEL |
| 1 | 11030620 | 6*20 | 1/2 | 6 | 20 |
| 2 | 11030622 | 6*22 | 1/2 | 6 | 22 |
| 3 | 11030625 | 6*25 | 1/2 | 6 | 25 |
| 4 | 11030628 | 6*28 | 1/2 | 6 | 28 |
| 5 | 11030630 | 6*30 | 1/2 | 6 | 30 |
| 6 | 11030820 | 8*20 | 1/2 | 8 | 20 |
| 7 | 11030822 | 8*22 | 1/2 | 8 | 22 |
| 8 | 11030825 | 8*25 | 1/2 | 8 | 25 |
| 9 | 11030828 | 8*28 | 1/2 | 8 | 28 |
| 10 | 11030830 | 8*30 | 1/2 | 8 | 30 |
| 11 | 11031022 | 10*22 | 1/2 | 10 | 22 |
| 12 | 11031028 | 10*28 | 1/2 | 10 | 28 |
| 13 | 11031032 | 10*32 | 1/2 | 10 | 32 |
Speed And Feeds
Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can’t find the information you’re looking for, Weix Tool has a team of technical experts available to assist you.
Contact Us: [email protected]
Recommended Products
TCT Three Flutes Spiral Bit
Two Flutes Tapered Ball Nose End Mill
Solid Carbide Corn End Mill
